At Stray Dog Strength we build custom setups for our customers, almost all our products have custom color options and many of our products offer custom logo options to display program pride throughout the facility. We offer many different laser cut logos as well as decal logos which can be more detailed and are also more cost effective. Continue reading to discover many of the customization options we offer!
Rack Logos
All Alpha Rack variations have our Logo Beam Connector that has pre tapped holes for our laser cut logos or can have a decal logo added which is shown below at Beal City High School.
Our Laser cut logos all use the same format, there are two logo spots for images on each side and in the center there is a text spot. These image spots are consistent across the Alpha Bench, Lat Pull Down, Hyperglute, Leg Extension/Leg Curl, Leg Press and all other laser cut bolt on logos.
Bridge Connector Logos
Shown above at Trimble HS is our oversized bridge logo displaying their wildcat logo on each side. These bridges can also be made with TV Mounts to add TV’s to for presenting programming or other educational content.
Bench Logos
Similar to our Alpha Racks our Alpha Bench also can have a bolt on Laser cut or Decal Logo added at anytime. Pictured above is a laser cut M for Miami University and below is a very detailed Tiger for Strasburg High School which could not be laser cut as it was too detailed. On Strasburg HS’s Racks they have laser cut logos so they opted for their simple S logo to be laser cut.
Stitched Wear Covers
Pictured above for Homestead High School are 3 custom Stitched Wear Covers on their Alpha Benches. These Trojan logos are on all 21 Alpha Benches they ordered. Stitched wear covers can be added to virtually any bench that the pad can be removed and then put back on the frame.
Custom Logo Bumpers and Plates
We now have custom logo Stray Dog Strength bumpers and change plates! The Custom Bumpers are available in 10, 25 and 45 LBS Options with 3 different customization options. Licking Heights pictured above chose option #3 for their bumpers. These custom bumpers are avialbe for the same price per bumpers as our Stray Dog Competition Bumper Plates but have a $750 setup fee and 1000 LBS minimum order quantity.
Custom Urethane Dumbbells
Stray Dog Strength Urethane Custom DB’s were designed go be a more premium offering for customers who want to display their custom branding. These have a 32 MM knurled handle and come in 5 LBS increments from 5-150 LBS.
Custom Stray Dog Barbells
Our Custom Stray Dog Logo Barbells are available with 96 Cerakote colors for the shaft and logo. The logo can be text as shown above or an actual logo which is shown below but it must be a single solid color logo. These bars have no setup fee and are $425, they must be ordered in qualities of 10 or more, no exceptions. They are 20 KG or 44 LBS and we also have a 15 KG or 33 LBS option. The end caps cannot be customized and always display the end cap shown above for the Stray Dog All Purpose Bar.
Custom Machines
As almost all our machines are made with frames of 3×3″ tubing with 1″ holes we can add logos basically where ever we want with our bolt on Logo Spot. Shown here on an Alpha GHD with a custom Silhouette logo of Jacob Nix Pitching for his custom Garage Gym. These can be added to DB Racks or any other 3×3″ tubing with 1″ holes. Pictured below is a Hyperglute Machine at Miami University Ice Hockey facility, these logos are added with two bolts connecting the two tubes on each side of the frame.
Custom Sleds
Our Hike Sleds are made fully of 3×3″ tubing with 1″ holes all over. This allows the width of the handles to be adjust as well as an optional bolt on low handle with a laser cut logo. These front handles can be added on later as well if desired as they bolt on with two 1″ bolts.
Custom Squat Wedges
Our Squat wedges can have simple laser cut logos added, pictured above is the Strong Rock Christian Academy Logo. These can be made in custom colors and logos for $875 for 5 or $175 each. They have a 1″ and 5/8″ hole to store them on an upright or crossmember off the floor.
Platform Logos
We install ECORE Athletic Inlaid Platforms, they can come with or without a logo and can be done in custom colors including the drop zones and lifting section which above are shown in Gray for the lifting section and in black for the drop zones.
Custom Logos/Flooring
We sell and self install ECORE Athletic Flooring Products, one the most popular we install are the Performance Line of Beast, Rally and Ultra Tiles. Shown above is a Franklin Heights Falcon logo which is located at each of the two entrances to the facility. Pictured below is a custom agility ladder that we have embedded in the floor at many schools, this is at Franklin High School.
Custom Turf
Pictured above at Franklin Heights High School is a piece of turf with a sponsorship logo added for Toyota West a local Car Dealership. Shown below is a large “center field” logo that was designed to look like Westerville South HS‘s Football field. Turf is a great way to add a functional space to your facility that is great for springs, jumping, warmups or sport specific work, such as running routes.
Dynamax Medballs
We work with Dynamax to make custom Dynamax Medballs with colors and logos.
Sponsorship Options
Many schools and organizations want to sell sponsorship opportunities for their equipment, we have a Silver and Black Bolt on laser Cut Sponsorship Plate that will blend in with your facilities colors.
Logo Topper
Our Logo toppers can be added to any 3×3″ tubing with 1″ holes, they are often added to ATR Units or on Top Beam Connectors which connect racks next to each other. Pictured above is a custom ATR Cable Column Unit for the Wolfhounds Military Base displaying Nec Aspera Terrent, their motto. Pictured below at Franklin Heights HS a Sponsorship logo for Funkys Automotive shop was added.
Other Custom Branding Option
The VertiMax Raptor unit is a revolutionary, rack attached resistance training system that is allows athletes to increase speed, power and many other athletic attributes at a rack station and can also have custom logos added. We also can put custom logos on Storage Cubbies, Bridges, Flooring and other places.
If you need a custom logo option that we do not have listed, please reach out to us, we can make basically anything as long as
